Momentum Modbus Plus 170 PNT Series Uživatelská příručka stáhnout pdf (Strana 69)

100

101

Assembling TSX Momentum Components

870 USE 101 00 V.2.2

Assembling a Processor Adapter and I/O Base,

Continued

Procedure:

Assembling a

Processor

Adapter and an

I/O Base,

Continued

Next Step

Once the Processor Adapter has been assembled, it can be mounted on a DIN rail

or surface mounted inside a panel enclosure. A TSX Momentum M1 CPU assembly

is classified as open equipment, i.e., electrical circuitry on the unit may be exposed.

Open equipment should be installed in an industry-standard enclosure, and direct

access must be restricted to qualified service personnel.

For a detailed description of installation procedures and grounding considerations,

refer to the

TSX Momentum I/O Bases User Manual

(870 USE 002 00).

Step Action

4 Push the Processor Adapter onto the base, gently pressing the locking tabs

inward.

Result:

The locking tabs on each side of the Processor Adapter slide inside the

I/O base and out through the locking slot. The 12-pin ATI connectors on the two

units are mated to each other in the process.

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 372 373

Komentáře k této Příručce

Žádné komentáře

Momentum Modbus Plus 170 PNT Series Uživatelská příručka Strana 69

Komentáře k této Příručce